110
DSP Effects
Turn ON/OFF Compressor
Press “Compressor” switch to turn the Compressor on/off.
Adjusting Compressor Parameter
Adjust the threshold and pregain levels of the low, medium, and high frequency ranges. The threshold sets the input
volume at which the compressor starts to work. The pregain sets the gain of the input signal before entering the com-
pressor.
Tips!
When adjusting the DSP effects parameters, press the [<] and [>] buttons at the same time to reset the pa-
rameters being edited.
AKX10_OM05_EN_190816.indd 110
2019/8/16 13:38