25
Playing Voices
Keyboard Tab
This menu contains “Keyboard”, “Velocity”, and “Play mode” parameters.
Keyboard
Right Octave
Determines the default octave shift of the edited voice when used as any of
the RIGHT 1-3 keyboard parts.
-2~+2
Left Octave
Determines the default octave shift of the edited voice when used as the
LEFT keyboard part.
-2~+2
Panel Sustain
Determines the length of sustain when using Panel Sustain.
64~127
Pedal Sustain
Determines the length of sustain when using Pedal Sustain.
64~127
Velocity
Slope
Adjusts the voice slope.
0~127
Offset
Adjusts the time curves as the velocity varies.
0~127
Play Mode Poly
Sets the voice to be played back with multiple simultaneous notes
(polyphonically).
Poly Portamento
Sets the voice to be played back with multiple simultaneous notes
(polyphonically) with legato.
Mono
Sets the voice to be played back with single notes only (monophonically).
Mono Portamento Sets the voice to be played back with single notes only (monophonically) and
legato.
Mono Legato
Sets the voice to be played back with legato.
Portamento Time Sets the transition speed from the first note played on the keyboard to the
next when playing mode is set to “Portamento”.
0~127
Tips:
If the play mode is set to “Mono”, only one sound will be produced at a time no matter how many keys you
play at the same time.
Portamento slides the pitch of one note played on the keyboard into the next note played. You can control the
transition time by adjusting the “Portamento time”.
Legato is a special mode of monophonic playing. When you press a new key while already holding another
key, the first note will immediately change to the second note played.
AKX10_OM05_EN_190816.indd 25
2019/8/16 13:37