126
2.
Press a pedal and the function menu appears to the right. Select a module, then select a function.
Press both the [<] and [>] buttons to reset the selected pedal to its default setting.
3.
Different pedal functions can be applied to different parts. Check the Part boxes to apply the current function to the
parts you want to control in real time.
Note!
Some function can only be used on the controller pedal and not on the switch pedal. If you assign the function
of the controller pedal to the switch pedal, the actual effect may not work correctly.
We strongly recommend that you use the official pedal accessories. The use of unofficial pedals may cause
polarity problems. If you encounter this problem, you can try to adjust the polarity by stepping on the pedal
when turning on the instrument.
Assign Buttons
This instrument has 3 assign buttons. The default settings are:
Assign button 1
Modulation Lock
Assign button 2
Voice Control
Assign button 3
Sync Style
Controllers
AKX10_OM05_EN_190816.indd 126
2019/8/16 13:38