47
Auto Accompaniment
Maj
This channel will only play when you use Major chords.
Min
This channel will only play when you use Minor chords.
All
This channel will play whether you use Major or Minor chords.
Non
This channel does not respond to chords.
The parameter options available are related to the current edited section:
• When the editing section is Intro or Ending, Maj, Min, All, and Non are all available. This is because when creating an
Intro and Ending section, the channel response major chord and the channel response minor chord are separated.
When you play a major chord, channel 9~16 will be played; when you play a minor chord, channel 1~8 will be played.
When editing and recording Intro and Ending sections, please consider how the “Chord Type” relates to “Channel
selection”.
• When the editing section is Main, Fill, or Break, Maj and Min are not available. This is because the Percussion channel
of the Main, Fill, and Break sections need to support all chords, and the percussion channel is not set up for chords at
all.
Note!
Remember that Style channels 1~8 and 9~16 use the same channel when played (1 and 9, for example). If
the two channels’ chord response are both set to All, but their other parameters (tone, volume, etc.) are differ-
ent, there may be problems when playing the Style, and it may not play according to your settings. Make sure
the parameter settings are consistent for your Style during setup to avoid this issue.
Channel Volume
Press the volume value. Then, press the Up and Down arrows, use the [DATA DIAL], or use the [</>] buttons to adjust
the volume value.
AKX10_OM05_EN_190816.indd 47
2019/8/16 13:37