mecalac AS 50, Operating Instructions Manual

Page: 66 / 114

S050/S051/Z050 8-6
8 Maintenance
2 1
2 1
8.2.6 Changing the oil in the axles
8.2.6.1 Rear axle
(1) Place a sufficiently large oil drain pan underneath the
axle.
(2) Unscrew the plugs from the axle arch (8-7/1 and
8-7/2) and the distribution gear (8-8/1 and 8-8/2) and let the
oil drain out.
CAUTION
Waste oil must be disposed of in such a way that it will not
cause pollution!
(3) Screw in the plugs for the axle arch (8-7/1) and the
distribution gear (8-8/1) again.
(4) Fill in oil via the plug hole in the axle arch (8-7/2) and
the distribution gear (8-8/2) until the oil reaches the
opening.
N O T E
- The axle ventilation valve (8-9/arrow) must be free of
dirt.
- Information about the quantity of oil is in the mainte-
nance plan.
- After a few minutes, when the oil level has lowered,
top up the oil until the oil level reaches the marked
level and remains stable.
(5) Screw in the plugs for the axle arch (8-7/2) and the
distribution gear (8-8/2) again.
Figure 8-7
Figure 8-9
Figure 8-8