mecalac AS 50, Operating Instructions Manual

Page: 20 / 114

S45E/S45T/Z45T 1-12
1 Safety regulations
1.7.4 When the machine is loaded and transported the
necessary auxiliary equipment must be fitted to prevent
any unintended movement. The tires must be kept clean of
mud, snow and ice so that the machine can drive on the
ramp without danger of sliding.
1.7.5 Restart the machine strictly observing the regu-
lations of the operating manual.
1.8 Safety information for the contractor
or the contractor’s authorized personnel
1.8.1 Organizational measures
1.8.1.1 We would like to emphasize that parts and
accessories that are not supplied by us are also not tested
and approved by us. Installation and/or use of such products
can thus negatively affect the constructional qualities of
your loader and thereby reduce the active and passive
driving stability. The manufacturer cannot be held respon-
sible for damage that results from the use of non-original
parts and accessories.
1.8.1.2 Inform about the location/use of fire extinguishers
(1-5/arrow) and first-aid kit (1-6/arrow).
1.8.2 Selection of personnel, qualifications;
additional duties
1.8.2.1 Only reliable persons are allowed to work on/with
the machine. The minimum legal age must be observed.
1.8.2.2 Only employ trained or instructed personnel.
Clearly define the competencies of the personnel regarding
operation, installation, maintenance and repair work.
Ensure that only authorized personnel may work on/ with
the machine.
1.8.2.3 Determine the driver’s responsibility regarding
traffic regulations. Authorize him to refuse instructions
given by third parties when these instructions are detrimental
to the safety of the driver and the machine.
1.8.2.4 Personnel that are being trained are permitted to
operate the loader only if they are under constant super-
vision of an experienced person authorized by the employer!
Figure 1-5
Figure 1-6