mecalac AS 50, Operating Instructions Manual

Page: 64 / 114

S050/S051/Z050 8-4
8 Maintenance
8.2 Maintenance work
8.2.1 Checking the engine oil level
See Engine Operating Instructions.
8.2.2 Checking the oil level in the axles
8.2.2.1 Rear axle
(1) Unscrew the plug from the axle arch (8-1/arrow).
N O T E
- The oil level must reach the plug bore.
- Collect any escaping oil.
(2) Replace the plug.
8.2.2.2 Planetary gear
(1) Move the loader until the marking line ”OIL LEVEL/
OELSTAND” is horizontal and the plug is located above the
top left of the marking line (8-2/arrow).
(2) Unscrew the plug.
N O T E
- The oil level must reach the plug bore.
- Collect any escaping oil.
(3) Replace the plug and fit a new gasket.
8.2.2.3 Front axle
(1) Unscrew the plug (8-3/arrow) from the axle arch.
N O T E
- The oil level must reach the plug bore.
- Collect any escaping oil.
(2) Replace the plug.
Figure 8-1
Figure 8-3
Figure 8-2