mecalac AS 50, Operating Instructions Manual

Page: 51 / 114

S45E/S45T/Z45T 6-3
Attachments 6
6.1.2 Fork-lift attachment
N O T E
- Illustration 6-4 shows the truck with a fork-lift attachment.
- Mounting and dismounting are carried out in the same
way as for the standard/lightweight bucket (chapter
6.1.1).
DANGER
- Both bolts of the quick-change device must fit in the
boreholes of the fork-lift attachment and must be clearly
visible (6-5/arrow).
- Distribute the weight equally on both fork tines and
secure it against moving and falling off.
- Rest the load at the rear of the fork and tilt the fork lift
attachment.
- Position both fork tines at an equal distance from the
center (6-6/arrows) and lock them.
CAUTION
The hydraulic quick-change device must only be locked
when an attachment has been mounted.
N O T E
- The fork tines are locked correctly when the two tiltable
locking levers are fully positioned on the fork carrier.
- The type plate is on the rear of the fork-lift attachment on
the upper fork support.
Figure 6-4
Figure 6-6
Figure 6-5