mecalac AS 50, Operating Instructions Manual

Page: 53 / 114

S45E/S45T/Z45T 6-5
Attachments 6
1 1
2 2
(5) Check the connection and the lock on both sides.
DANGER
Both bolts of the quick-change device must fit in the
boreholes of the bucket support and must be clearly visible
(6-9/arrow).
(6) Stop the engine.
(7) Remove the pressure from the hydraulic lines with
back and forth movements of the hand lever
for auxiliary hydraulics (4-7/16).
(8) Remove the protection caps from the hoses of the
multi-purpose bucket (6-10/2) and pull them from the
hoses of the multi-purpose bucket (6-10/1).
(9) Connect the hoses of the multi-purpose bucket with
the quick couplings of the quick-change device by pressing
them firmly (6-10).
CAUTION
When making connections, pay attention that the hydraulic
connections are clean and complete.
Dismounting
(1) Place the multi-purpose bucket firmly on the ground.
(2) Stop the engine.
(3) Remove the pressure from the hydraulic lines with
back and forth movements of the hand lever for the auxiliary
hydraulics (4-7/16).
(4) Dismounting takes place in the reverse order of
mounting. However, to unlock the multi-purpose bucket,
the release button for the quick-change device (4-8/2) must
be used.
CAUTION
The hydraulic quick-change device must only be locked
when an attachment has been mounted.
N O T E
The type plate is on the rear of the bucket, on the right on
the cross arm.
Figure 6-10