mecalac AS 50, Operating Instructions Manual

Page: 23 / 114

S45E/S45T/Z45T 2-3
Signs 2
1 Sign: ATTENTION! - Only the rear-wheel steering may be used for driving on public roads!
2 Sign: ATTENTION! - Steering is only available while the engine is running!
3 Sign: ATTENTION! - The hydraulic quick-change device must only be locked if an
attachment has been mounted.
4 Sign: » Only for loaders with pipe break protection «
ATTENTION! -
The lift cylinders’ pipe break protection is disabled when the lifting
suspension is switched on.
Do not switch on the lifting suspension while the fork-lift or lifting hook attachment is fitted.
5 Symbol: Read and implement instructions in manual before commissioning.
Ensure that all other users are aware of safety precautions!
6 Symbol: Switch steering type (4-6/3)
Rear wheel /Four wheel
7 Sign: Noise level (Chp. 11.17)
8 Sign: Accoustic pressure (Chp. 11.17)
9 Symbol: Lifting hook
10 Symbol: Lashing points
11 Sign: Low noise emission equipment
12 Sign: Max. speed
13 Sign: Maintenance plan
14 Sign: Tire pressure
15 Symbol: Heater
16 Symbol: Dangerous area, keep clear
17 Symbol: Hydraulic oil tank
18 Symbol: Manual lever for main hydraulics (4-7/2)
19 Symbol: Hydraulic gear shift (4-7/1 and 4-7/3)
Hare symbol
- road
Snail symbol - field
Direction - forwards
- 0
- reverse
20 Symbol: Manual lever for auxilliary hydraulics (4-7/6)
21 Symbol: » Only for loaders with second auxiliary hydraulics circuit «
Manual lever for auxilliary hydraulics (4-7/6)
22 Symbol: Swivel joint
23 Symbol: Fuel tank
24 Type plate: Machine (includes vehicle ID number)
25 Sign: Annual inspection to TC standards
26 Sign: TC plaque
27 Symbol: Stop valve for main/auxilliary hydraulics - closed
28 Type plate: Operator´s cabin
29 Symbol: Do not open while engine is running
30 Symbol: » Only for loaders with front-end excavator «
Switching attachment (at the tip cylinder)
31 Sign: Use mineral oil DIN 51524-HVLP 46 ISO VG 46 VI > 180
32 Symbol: » Only for loaders with second auxiliary hydraulics circuit «
Pilot valve fold-away
33 Sign: » Only for fast loaders «
ATTENTION!
- The distribution gear may only be shifted when the loader is not moving.
When shifting gears, set the drive direction lever to “0” (gear shift released after 5 sec.).