mecalac AS 150e, Maintenance Manual

Page: 9 / 19

S160/S161/S165/Z162 8-9
Maintenance 8
1 2 3 4
8.2.6.2 Planetary gear
(1) Move the loader so that the plug (8-16/arrow) is
positioned at 6 o’clock.
(2) Place an oil drain vessel with a drain channel under-
neath the gear.
(3) Unscrew the drain plug and let the oil drain out.
CAUTION
Waste oil must be disposed of in such a way that
it will not cause pollution!
(4) Move the loader until the marking line ”OIL LEVEL” is
horizontal and the plug is located above the top left of the
marking line (8-17/arrow).
(5) Fill in oil via the plug bore until the oil level reaches the
opening.
(6) Use a new gasket when screwing the plug back in.
8.2.6.3 Front axle
(1) Place a sufficiently large oil drain pan underneath.
(2) Remove the plugs from the axle arch (8-18/1, 8-18/2,
8-18/3, 8-18/4 and 8-19/Pfeil) and drain the oil.
CAUTION
Waste oil must be disposed of in such a way that
it will not cause pollution!
(3) Screw the plugs (8-18/1, 8-18/2 and 8-18/3) back in.
Figure 8-17
Figure 8-16
Figure 8-18