S160/S161/S165/Z162
8-7
Maintenance
8
8.2.4
Oil level check of the hydraulic oil
reservoir
(1) Park the loader in a level position.
(2) Move the bucket to its lowest position.
(3) Tilt the quick-change device and move out the locking
bolts using the hand lever for the auxiliary hydraulics
(4-6/5).
(4) Open the motor hood.
(5) Check the oil level in the view glass (8-10/arrow).
N O T E
-
The oil level must be visible in the upper
quarter of the view glass.
-
If necessary, top up hydraulic oil via the filler
neck (8-11/arrow). Use the special tool (flat
open-ended spanner) to undo the lid of the
hydraulic oil tank.
8.2.5
Oil change, engine
(1) Unscrew the maintenance flap from the motor protec-
tion (8-12/arrow).
(2) Place a sufficiently large oil drain pan underneath the
axle.
(3) Open the motor hood.
(4) Unscrew the cover of the oil drain plug on the motor.
(5) Screw the drainage nozzle with hose from the tool box
(4-1/13) to the oil drain plug.
(6) Remove the cover cap from the hose.
(7) Further procedures are to be found in the Engine
Operating Manual.
Figure 8-11
Figure 8-10
Figure 8-12
Summary of Contents for AS 150e
Page 1: ...Maintenance...
