mecalac AS 150e, Maintenance Manual

Page: 10 / 19

S160/S161/S165/Z162 8-10
8 Maintenance
2
1
(4) Fill oil into the plug bore (8-18/4 or 8-19/arrow) until
the oil level reaches the opening.
N O T E
- Details regarding the amount of oil required
are given in the maintenance plan (page 8-1).
- After a few minutes, when the oil level has
lowered, top up the oil until the oil level
reaches the marked level and remains stable.
- The vent valve of the axle (8-20/arrow) must be
free from dirt.
(5) Screw the plugs (8-18/4 and 8-19/arrow) back in.
8.2.7 Oil change, distribution gear
8.2.7.1 Oil change, distribution gear
Type 1:
(1) Remove the foot mat in the footwell of the operator’s
cabin.
(2) Dismantle the floor plate under the foot mat.
(3) Place a sufficiently large oil drain pan with a drain
channel underneath.
(4) Unscrew the filling (8-21/1 and 8-21/2) and drain
plugs (8-22/2) and let oil drain from the upper oil compartment
through the drain channel.
Figure 8-20
Figure 8-19
Figure 8-21
Top view