mecalac AS 150e, Maintenance Manual

Page: 4 / 19

S160/S161/S165/Z162 8-4
8 Maintenance
8.2 Maintenance work
8.2.1 Engine oil level check
See the operating instructions for the engine.
8.2.2 Oil level check for axles
8.2.2.1 Rear axle
(1) Unscrew the plugs from the axle arch (8-1/arrow) or
(8-2/arrow).
N O T E
- The oil level must reach the plug bores.
If necessary, top up oil.
- Collect any oil that escapes.
(2) Screw in the plug again.
8.2.2.2 Planetary gear
(1) Move the loader until the marking line ”OIL LEVEL” is
horizontal and the plug is located above the top left of the
marking line (8-3/arrow).
(2) Unscrew the plug.
N O T E
- The oil level must reach the plug bore.
If necessary, top up oil.
- Collect any oil that escapes.
(3) Fit a new gasket and screw the plug back in.
Figure 8-1
Figure 8-3
Figure 8-2