manualshive.com logo in svg

Me R189, User Manual

Share
Download
Me R189 User Manual Download Page 74

 

- 73 - 

6. Decoder 

 

The four choices on the Decoder page both bring up viewers of current and expired alerts. 
You can choose between 

Incoming

/

Decoded

 

Alerts

, 

Forwarded Alerts, Originated & 

Forwarded Alerts, 

and

 All Alerts.

 .  These One-Net interfaces let you see exactly which 

alerts have been decoded and which have also been forwarded, helping you precisely audit 
EAS activity. 

6.1. Decoded 

Alerts 

 

The 

Incoming, Active & Expired Alert Status

 page displays two kinds of 

information about decoded EAS alerts.  At the top of the page active EAS alert events 
are displayed.  Below that is the list of Expired EAS alerts. Also, at the top of the 
page the current Forwarding Mode is displayed as either “Auto Forward Mode” or 
“Manual Forward Mode”. 

 

The event status page can be printed out from the local host's printers, by using the 
Web browser's print button.  This makes it easy to compile FCC paper documents for 
EAS test accounting. 
 

 

Summary of Contents for R189





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands