Me R189, User Manual

Page: 57 / 100

- 56 -
This code is placed in the EAS alert message when the encoder originates an
EAS alert. This same code is used for both manually forwarded alerts and
automatically forwarded alerts. If these descriptions do not match your
application (ie Telephone company) you should select EAS, and place a check
in the box for custom text for translation for Origination Code. When this is
enabled you will be able to customize how the text is displayed. An example
of this is shown below. When a Weekly test is activated by the One-Net the
displayed the text will be “NEW YORK TELEPHONE HAS ISSUED A
REQUIRED WEEKLY TEST FOR THE FOLLOWING
COUNTIES/AREAS: Orleans,NY; AT 10:36 AM ON MAR 23, 2006
EFFECTIVE UNTIL 10:51 AM. MESSAGE FROM NY12345 . “
EAS Station ID
Type up to 8 characters in this text field to identify the Station ID for this
One-Net. This code will be included in all originated alerts; both manually
forwarded and automatically forwarded alerts. NOTE: Encoder Station ID is
different from Forwarding Station ID.
Attention Signal Duration
This control allows setting the duration of the two-tone attention signal from
8-25 seconds.