manualshive.com logo in svg

Me R189, User Manual

Share
Download
Me R189 User Manual Download Page 68

 

- 67 - 

Select the Generic Private Descriptor toggle to enable and then configure the three provided 
fields. If the IP target is a multicasting router, make sure to enter a number for the Multicast TTL 
field that describes the maximum number of routing jumps that will be made before the target 
clients are reached. 
 

 

Alerts for specific FIPS areas and specific EAS Codes can also be filtered before DVS644 is 
triggered. See the screenshot below. Set the checkbox to enable/disable FIPS filtered trigger 
control. If enabled, select FIPS codes from the provided lists and Add to the client FIPS list. If 
any of these FIPS are included in the incoming active forwarded/originated alert, the alert will be 
sent to this DVS-644 client. With careful use of this feature, and with multiple clients, one One-
Net can serve many different cable regions at the same time.   

EAS Code filtering can be programmed using the same method as the FIPS code filtering. 

 

When done, click on the Accept Changes button to save the configuration.

 

Summary of Contents for R189





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands