manualshive.com logo in svg

Me R189, User Manual

Share
Download
Me R189 User Manual Download Page 49

 

- 48 - 

5.8.  Setup > Decoder 

 

By default, a One-Net will run two EAS decoder channels from the Main audio 
device.  It will decode EAS out of the box.  However, a variety of useful options can 
be configured to tune the decoder for operation in a specific system within a specific 
geographic region.  All decoder configuration options can be accessed through the 

Setup > Decoder

 page.   

 

 

5.8.1. 

Setup Decoder > Forwarding 

 

The Decoder Forwarding page is used to configure EAS alert forwarding. Forwarding is 
when a decoded EAS is relayed out an audio output of the One-Net, presumably into a 
broadcast audio signal, and display a video message out of the serial port controlled 
character generator and One-Net video output.  Forwarding can be automatic or manual. 
Forwarding can be set so that all alerts to any FIPS area are forwarded, or it can be highly 
constrained so that only a select few EAS codes to specific FIPS areas are forwarded. Use 
this screen to configure station identity settings and to select EAS alerts that are forwarded. 
To select the actual audio output port(s) for forwarded alerts, a different Web Interface 
page is used see 

Setup Audio > Decoder Audio

. Forwarded alerts are logged on the 

Decoder > Forwarded Alerts

 display page.     

Summary of Contents for R189





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands