Me R189, User Manual

Page: 40 / 100

- 39 -
NOTE: The interface pages for Decoder and Encoder Audio display and
reference audio output levels for certain features. These references always
provide an active hyperlink into this page to allow for changes to audio output
levels.
To test the Main and/or Auxiliary Audio outputs, attach speakers to the One-
Net audio device output ports and run the various tone test buttons. The Front
Panel Speaker can be tested as is. These tests allow the One-Net to play each
of the two single tones that comprise the dual-tone EAS Attention Signal. The
EAS Attention signal and WAV files can also be played. The duration of the
test is set per Audio device by the
Test Tone Duration fields.
Audio tests, audio levels and duration changes occur immediately.
Alert Audio toggles
The Main and Auxiliary Audio displays also display with an active hyperlink
if alert audio from originated and forwarded alerts is enabled. Clicking these
links will jump to the correct Decoder and Encoder Audio setup page for
changes to be made.
Upload Audio .WAV file to One-Net Server
This interface allows Wav files to be uploaded into the One-Net. Uploaded
audio files are available for tests as well as for encoding and manual
forwarding.
5.6.2. Decoder Audio
There are three features provided to configure decoder audio: Alert Decoding,
Decoder Audio Monitoring, and Alert Forwarding.
Each One-Net EAS decoder channel can be independently tuned for input
sensitivity, and also can be enabled and disabled with the provided interfaces.
The audio devices used during alert forwarding are also configured from this
screen.