Me R189, User Manual

Page: 59 / 100

- 58 -
•
To build or edit the list, choose an EAS code type from the pop down
menu and click Add. Codes selected for encoding will appear in the
Configured Available Encoder EAS Codes box to the right. Be sure and
add all common EAS types that will be used when encoding alerts from
this One-Net. If you find you are missing a code during encoding, you
can edit the pool list at any time. To add a group of messages of a certain
type, you can click one of the buttons (ie Add Watches).
•
To remove a code from the Configured Available Encoder EAS Codes
list, select and click Remove Selected.
All operations are immediate.
Configured Available Encoder FIPS Locations
The One-Net must also be configured for the commonly used FIPS locations
that will be used during alert encoding. Just as for the EAS Codes list, a
commonly used list of FIPS locations need to be constructed from the list of
all possible FIPS. The list is referred to on the One-Net as the Configured
Available Encoder FIPS Locations. There are thousands of FIPS location
codes, so building this list of commonly used FIPS codes saves time during
typical alert encoding. In the rare event that other FIPS locations are needed,
the list can be edited at any time.
•
Choose each FIPS location code for the Subdivision, State (or territory)
and the County (or County Equivalent). Then click Add. FIPS locations
selected for automatic forwarding will appear in the
Configured
Available Encoder FIPS Locations field to the right. Make sure and add
all the common FIPS codes that will be used when encoding alerts from
this One-Net. Otherwise, while constructing an alert, you may have to
return to this screen to add any FIPS codes that are missing from the
Configured Available Encoder FIPS Locations list on the
Encoder > Send
EAS >General EAS screen.
•
To remove a location from the Configured Available Encoder FIPS
Locations , select a line in the Configured Available Encoder FIPS
Locations field and click Remove Selected.
•
All operations are immediate.
•
If when encoding an alert on the screen Encoder > Send EAS > General
EAS screen, you find that a FIPS location code is missing, there is a link
on that screen back to the Setup > Encoder > General screen so you can
amend the FIPS pool
.