manualshive.com logo in svg

Me R189, User Manual

Share
Download
Me R189 User Manual Download Page 7

- 6 - 

•

Standard PS/2 keyboard/mouse ports

•

Supports PCI expansion card, use with audio card for scanning two more audio
inputs

•

Internal speaker for monitoring

•

Can be safely powered off/on without disk damage

•

Optional GPI input/output and balanced audio output module.

One-Net general software features/specs 

•

Linux 2.4.24 operating system

•

Built in multi-user, password protected Web interface for
control/status/monitoring of all activity.

•

Web interface supports SSL.

•

KDE desktop available via directly connected keyboard/mouse/VGA monitor

•

Supports sending email for decoded/forwarded/originated alerts

•

Support SMS pager output using USB modem

•

Socket based network interface for monitoring/control

•

Supports WiFi wireless networking via USB

•

Supports a variety of printers via USB/Parallel

•

Supports operational status indication via LED and LCD

•

Web interface for software update

•

Support for optional GPI input to trigger actions and optional GPI output during
alerts.

•

Supports DVS-168 for DNCS (SA) (Optional).

•

Supports DVS 644 Standard (SCTE 18) (Optional).

One-Net decoder features 

•

Decodes FCC EAS codes and NOAA SAME codes.

•

Automatic audio level correction for reliable operation.

•

Supports fully unattended operation.

•

Supports manual and selectable automatic alert auto-forwarding.

•

Easy to use web interface for configuration of auto-forwarding locations and
codes.

•

Web interface for easy review and print logs of active and expired
decoded/forwarded alerts.

•

Stores user configurable number of previous alerts.

•

Supports multiple simultaneous active decoded alerts.

•

Configurable audio output port selection for alert forwarding.

•

Decoding status displayed on unit LCD and LED.

•

Stores each audio section of EAS alerts into digital files.

•

Supports several protocols for alert audio playback and alert translation data
transfer

•

Will support scanning up to six input channels (depends on hardware expansion)

Summary of Contents for R189





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands