Technical Manual Glass Push Button II Smart BE-GT2xx.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
85
LED display behaviour
At day
(value ON)
Any color
Color for the object value ON /
activated button in day mode
At day
(value OFF)
Any color
Color for the object value ON /
non-activated button in day
mode
Behavior at day
(value ON)
permanent
blinking
Setting the lighting behavior
when LED has the object value
ON or the key is pressed
At night
(value ON)
Any color
Color for the object value ON /
activated button in night mode
At night
(value OFF)
Any color
Color for the object value OFF /
non-activated button in night
mode
Behavior at night
(value ON)
permanent
blinking
Setting the lighting behavior
when LED has the object value
ON or the key is pressed
Table 69: Settings - LED 1-12/A/B
Each LED can either react to any external object, such as the status of an actuator, an internal object,
or key operation. In addition, an LED can also react to an external or internal object and the key
operation. With this setting, the adjustments in the menu LED 1-12 / A / B refer to the control of the
LEDs via the object. In this case, the behavior of the button actuation is set globally for all LEDs and is
described in menu 4.4.1 LED. The behavior for the key operation has priority.
If the "LED reacts to - internal object" setting is selected, the object number with which the LED is to
be linked is selected.
If, for example, button 2 is set to "switch" - "toggle" in the one-button function and the LED is to
respond to the object "value for toggle", the object number "6" has to be entered. In this case, the
status LED would turn on when the object has a 1 and turn off when the object has a 0. If the LED is
linked to an object which is not 1-bit, the LED is switched off when the object is set to 0 and turned
on when the value of the object is not 0. For an object of the DPT 5.001 (percent) would mean that
the LED is switched off at 0% and is switched on at all other values.
Each LED can accept different colors and behavior for day and night operation and switches
depending on the object "106 - day/night".
The following table shows the available communication object:
Number
Name
Length
Usage
77
LED 1
1 Bit
Controlling the LED; Object is only displayed if
LED reacts to external object
Table 70: Communication object - LED
