Technical Manual Glass Push Button II Smart BE-GT2xx.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
37
Messages/Alarms
The following figure shows the available settings for messages and alarms:
Figure 9: Settings: Messages / Alarms
The following table shows the settings for the messages and alarms:
ETS-Text
Dynamic range
[Default value]
Comment
Message 1-4 (Bit Objekt)
not active
active
Activation of message 1-4;
Message 1 (highest priority),
Message 4 (lowest priority)
Text
any text (max. 14 characters)
Displayed text when the
message is triggered
Display time
not active
Until key is pressed
1s-8h
Setting how long the message
should be displayed
Message text (14 Byte Object)
not active
active
Activation of the message text
via the 14 byte object; Message
text has the lowest priority of
all messages
Display time
not active
Until key is pressed
1s-8h
Setting how long the message
should be displayed
Cancel the messge (only for
hardware from version R1.5)
Over the end of display
time or push of button
Over the value 0 at
o je ts Message
1-4
Setting when the message
should be taken back
