Technical Manual Glass Push Button II Smart BE-GT2xx.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
33
4.1.3 Information screen
The following figure shows the basic settings for the information screen:
Figure 7: Basic Settings - Information Screen
The following table shows the basic settings for the information screen:
ETS-Text
Dynamic range
[Default value]
Comment
Color of the orientation LEDs in
standby
Black, White
…
[White]
Adjusting the color of the
orientation display; This can be
used for day/night operation;
RGB states of the buttons are
used as orientation indicators
Timeout for standby (0=never)
0-60s
[20s]
Sets the time between the last
touch of a button and switching
to standby mode
Standby display
display in one line
display in two lines
Setting whether the display is
shown in one or two lines
during standby
Change standby display after
1-60s
[2s]
Sets the changeover time
between the activated status
elements
