vi
MDS Orbit MCR-4G Technical Manual
MDS 05-6628A01, Rev. B
should be in accordance with the transceiver's installation manual, and the National Electrical
Code.
Tampering or replacement with non-factory components may adversely affect the safe
use of the transceiver in hazardous locations, and may void the approval.
A power connector
with screw-type retaining screws as supplied by GE MDS must be used.
Do not disconnect equipment unless power has been switched off or the area is known to
be non-hazardous. Refer to Articles 500 through 502 of the National Electrical Code
(NFPA 70) for further information on hazardous locations and approved Division 2 wiring
methods.
EXPLOSION
HAZARD!
