9
PREPARING THE WHEELCHAIR
FUSE
When your wheelchair will be overheated press the fuse to break the circuit and ensure protection
against damage.
CLUTCH
The wheelchair has a clutch lever enabling to disconnect the electric drive and push the wheelchair
manually.
If you want the electric drive to be activated, push the clutch lever forward.
If you want the electric drive to be deactivated, pull the clutch lever.
ATTENTION
Do not deactivate the electric drive, if there is no one who could push your wheelchair.
Do not deactivate the electric drive when the wheelchair is on an inclined surface, as it could roll
down and this could lead to serious injuries.
REMEMBER THAT WHEN THE ELECTRIC DRIVE IS DEACTIVATED, THE ELECTROMAGNETIC BRAKING
SYSTEM IS ALSO DEACTIVATED.
Always stand behind the wheelchair when you are deactivating the electric drive. Do not
deactivate the electric drive when sitting on the wheelchair. When you place your wheelchair in
the desired location, remember to activate the electric drive again.
