background image

23 

 

 

Annual review 

 
The  review  should  be  performed  in  the  service  centre.  The  review  aims  to  confirm  that  the 
wheelchair functions without impairments, all its systems (electric, electronic, drive system) function 
without  problems.  It  also  enables  to  prevent  possible  complications  resulting  from  impairments 
within any of the systems. The review should include: 

1.

 

Tyre control. 

2.

 

Control of batteries and their connections. 

3.

 

Control of the activity concerning the control panel (electronic system). 

4.

 

Frame control. 

5.

 

Control of the upholstery condition. 

Utility remarks 

 

1.

 

Protect the control panel against severe shock and impacts. 

2.

 

Protect  the  wheelchair  against  long-lasting  exposure  to  high  and  low  temperatures  and 
humidity. 

3.

 

Keep the control panel and control shifter clean. 

4.

 

Protect the wheelchair against direct contact with water. 

5.

 

Keep the frame and the upholstery clean. If the frame or the upholstery is dirty, clean it with 
a soft, dry cloth. Do not wash it with any abrasive materials. Do not use any washing agents 
directly on control panel, batteries or electric parts. 

6.

 

Apply oil on wheel axles every three months. 

7.

 

Use only the batteries supplied by the manufacturer with the wheelchair. In case when you 
want to change batteries, contact your distributor. 

8.

 

Load  your  batteries  on  regular  basis.  Always  make  sure  that  the  charger  is  properly 
connected to the socket. Do not disconnect the charger by pulling the cord. 

9.

 

Control the activity of control shifter when the control panel is deactivated. Check whether 
the  shifter  is  not  damaged,  and  check  if  it  returns  to  neutral  position.  Check  the  rubber 
covering the control shifter, making sure that it is not damaged. In case  if you discover any 
damage, do not try to solve it individually, but contact the service centre. 

10.

 

Check all cords. If you discover any damages (chafing, tearing), contact the service centre. 

11.

 

Make sure that the control panel has been properly fixed. 

12.

 

Store  the  wheelchair  in  a  dry  place,  long  exposure  to  humidity  may  result  in  corrosion  of 
frame elements and damage of the electronic system. 
 

ATTENTION 
 

If you observe any problems related with the motor, charger, control panel or damage of the wheelchair frame, 
immediately contact the service point. 
 
In  case  of  any  problems  or  impairments  related  with  the  functioning  of  the  wheelchair,  contact  the  service 
point, which will help you to determine the future manner of proceedings. 

 
 
 

Summary of Contents for HERO STAND UP

























Reviews: