12
CONTROL PANEL
Control shifter is located on the control panel. Control
shifter enables to move the wheelchair. It also has a set of
keys to manage all functions of the wheelchair.
Power switch
is used to activate and deactivate the power
supply of the wheelchair.
Do not use this switch to stop the wheelchair.
Battery charge indicator
. It is located in the upper part of
the control panel and it indicates the level of battery
charge. It also acts as the system diagnosing any possible
damages.
ATTENTION
When the battery is low, the first red LED begins to flash. This means that it is essential to
immediately charge the battery.
Control shifter enables to control the direction and speed of
the wheelchair. When you move the shifter from the neutral
position (location in the middle), the electromagnetic brake
of the wheelchair is released, which enables the wheelchair
to move. Bigger inclination of the shifter from the neutral
position means greater speed of the wheelchair. When the
control shifter returns to the middle position, the braking
system is activated, which causes gradual slowing of the
wheelchair, until the wheelchair comes to a full stop. Moving
the shifter from the neutral position to the back, makes the
wheelchair move backwards. Moving the shifter to the right
will make the wheelchair turn right, whereas moving the
shifter to the left will make the wheelchair turn left. The
shifter can also be used to manage other functions, after
changing the operation mode.
ATTENTION
When the wheelchair begins to move in an undesired direction, release the control shifter and let
it return to the neutral position. Despite the failure of the shifter, this action will activate the
braking system and the wheelchair will stop.
