background image

 

PREPARING THE WHEELCHAIR

 

 

SYSTEM OF STABILISATION STRAPS 

 

Remember to properly fasten knee, chest and hip stabilisation straps before moving to the upright 
standing position. 

 
Stabilisation straps are used to stabilise the body and limbs when moving forwards and when moving 
to an upright position. They do not stand as protection in case of possible collision. Before initialising 
the verticalization process, it is crucial to check if all straps are properly tightened. 
 

MAINTENANCE 

 
Hero  Stand  Up  is  an  electric-powered  device  with  complicated  structure,  and  therefore  it  is  not 
allowed to repair or modify the wheelchair independently. In case of any problems with functioning 
of the wheelchair, contact the authorized service. 
 
Individual modifications, repairs and part replacement will void the warranty. 
 
Programming the parameters of the wheelchair should be performed in the presence of a qualified 
medical  personnel,  in  order  to  ensure  that  selected  parameters  meet  functional  capacities  of  the 
patient.  Failure  to  properly  adjust  the  parameters  may  cause  improper  use  of  the  wheelchair  and 
may lead to fall or to injury. 
 
In case of any doubts concerning the functioning and the use of your wheelchair, contact customer 
service, where you will be able to obtain all crucial explanations and instructions. 
 

PREPARING THE WHEELCHAIR 

The  wheelchair  is  delivered  in  a  cardboard  package,  and  its  delicate  parts  are additionally  secured 
against damage during transport. Unpack the wheelchair very carefully, to avoid any damage. 

TRANSPORTING THE WHEELCHAIR 

 

The  wheelchair  should  be  transported  only  with  the  use  of  appropriate  means  of  transport.  When  transported,  the 
wheelchair should be secured with the help of straps attached in placed indicated with a blue label (the illustration aside 
shows places where abutments should be attached, marked with circles). Wheels should be blocked. 
 
It is forbidden to sit on the wheelchair during transport, as it can lead to a fall and serious injuries. 
 
The wheelchair cannot be transported by means of transport that are not adjusted to transporting wheelchairs - means that 
do not have a special locking system, since this can cause damage to the wheelchair. 
 
Always make sure that the wheelchair is properly fixed in the means of transport, as otherwise it 
may not only cause injuries among people travelling in the same means of transport, but it may 
also cause serious damage of the means of transport. 
 
When entering a ramp leading to the means of transport the wheelchair should be secured at the 
back, to prevent it from falling. 

 

Summary of Contents for HERO STAND UP

























Reviews: