Me2, Fog Generator
Operating Guide, Rev: A/a
9 / 30
Working with the Me2
The MDG
Me2 Fog Generator
is quite easy to operate and requires no preventive maintenance.
Switch On
the power.
The MDG
Me2
will display during four (4) seconds, the following message:
Me2, by
MDG Fog Generators
Testing BootLoad….
These four seconds allow you to connect the generator to your PC, via a USB cable, to update
the firmware of the control board (
see BootLoader
for further details).
Then, the MDG
Me2
will display during one (1) second, the following message:
Me2
by
MDG Fog Generators Ltd
(V: x.xx – F: y.yyy)
where ‘x.xx’ is the version of your generator, and ‘y.yyy’ is the firmware of the program.
The program will load the configuration parameters saved in the EEPROM memory.
Finally, the screen will display the menu.
Summary of Contents for ME2
