Me2, Fog Generator
Operating Guide, Rev: A/a
23 / 30
Symptoms
Probable Causes and Suggested Actions
ERROR = PCB HIGH
Stop the generator for a few minutes, if
it is possible
Try to change the position of the
generator to a cooler location.
Please contact MDG Service if this problem
persists.
ERROR = WD RESET
Restart the generator.
Please contact MDG Service if this problem
persists.
LCD displays strange letters or does not seem
to work normally
In some conditions (Radio transmission or static
discharges), the LCD may lose its settings. The
generator is still working, but the LCD displays
strange or no characters:
Wait 30 seconds without touching any
key, until the LCD saver starts
Press any key
If the menu does not reappear, restart the
generator.
Please contact the Service if this problem
persists.
Summary of Contents for ME2
