McLane Research Laboratories Mark 78H-21, User Manual

Page: 46 / 168

4-2
Section 4.2
Preparing and Attaching the Sample Bottles
Preparing and attaching the sample bottles includes filling each sample bottle approximately 7/8
full with neutral water.
1. Follow the steps in Chapter 2, ‘Getting Started with your McLane Sampler’ to
establish communications with the Sediment Trap.
2. Close and seal the controller housing (see Chapter 6 in this User Manual for
instructions).
3. If using the Tilt sensor, see Section 4.5 ‘Orienting End Cap for Optional Tilt’.
Otherwise, skip to Step 4.
4. Wash and rinse the sample bottles with neutral/distilled water.
5. Dry bottles thoroughly.