McLane Research Laboratories Mark 78H-21, User Manual

Page: 63 / 168

4-19
6. The prompt confirms that the rotator is aligned to the open hole. Type N if the
rotator is not aligned, and advance to the open hole.
7. Confirm the system clock is correct (McLane firmware uses a 0-24 military time
convention).
8. If prompted, confirm that existing data will be erased
9. If prompted, confirm whether you are entering a new schedule. Type N if you have
previously entered a schedule for the deployment.
Figure 4.6-9: Confirming Rotator Position, System Clock and Number of Events
Selection [] ? 6
Is the rotator aligned to the open hole [N] ? y
Clock reads 06/16/17 14:10:52. Change [N] ?
Existing deployment data file will be erased. Continue [N] ? y
Enter new deployment schedule [N] n