PBXgateway II Quick Installation Guide
56
HTML Interface
The PBXgateway can be configured using a standard web server over an existing LAN connection. This
feature provides the system administrator complete management capabilities as well as status
information for both WAN and PORT connections.
IMPORTANT:
•
All IP parameters for the PBXgateway must be configured before the web server session can be
established.
•
The PBXgateway must be connected to the LAN via the
LAN
port.
•
The PBXgateway must be powered up and online (see
Power-up
procedure on page 20).
Procedure
1. Access the Management Interface (MI) using a Telnet session or via the Console Port.
2. Access the Web Server parameter using the following path:
Configuration->IP->LAN->Web Server
3. Select
YES
for Enabled. Set the Timeout to
30
.
4. Save the settings and Log out of the MI.
5. Open any web browser from your PC.
Example:
Windows Internet Explorer (version 5.X or higher).
6. At the http:// prompt type in the IP Address of the PBXgateway as shown below.
Figure 23: http Prompt
The HTML pop-up window will appear.
Figure 24: Managing the Device
