PBXgateway II Quick Installation Guide
35
ConneX Parameters
Table 4:
ConneX Port Parameters
Parameter Description
Enable
This will enable ConneX features on the selected port. Select No, Yes or
Default.
Dialback Mode
A configurable setting that determines where the PBXgateway II routes
your calls. There are four different Dialback Modes and the level of
security varies from one to another: Roaming, Disabled, Fixed and
Fixed/Forced. The System Administrator the only person who can
change the Dialback Mode.
Dialback Number
The telephone number that the PBXgateway uses to reach you on your
mobile phone. Incoming calls to your office extension are routed to the
dialback number that is currently set.
Note: Dialback number must include prefix (9+ 1 e. g.) necessary to
access outside line.
Note: If necessary, a comma (,) will be used as a pause in the dialstring.
Transfer Key
(Meridian Only)
Assigns Transfer call function to a specific key mapped on the PBX.
Conference Key
(Meridian Only)
Assigns Conference call function to a specific key mapped on the PBX.
Trunk Key
(Norstar Only)
This item only needs to be set on a ConneX Trunk port:
ConneX -> Enabled = Trunk
When the EXTender needs to dialback the ConneX user needs to know
what key to press to access a line and dial the user.
Sounds...
RCX Phone
Detection
Enabled, Disabled. Select Enabled only when the remote client is using
an ADSI enabled RemoteConneX Phone. This will enable ConneX and
allow RemoteConneX Phone user to use the special phone features.
Ring Count
Properly setting this ring count will ensure calls are routed to your
Corporate Voice Mail instead of your mobile service provider’s voicemail.
Ring count will dictate the number of audible rings the GW will send to
the remote phone, via dialback before going to your corporate voice
mail.
Set this count at least one ring higher then your service provider’s
voicemail ring count. In most cases a Telco will set their voicemail ring
count to 4 rings. We suggest setting this value to at least 5 rings to
ensure your Corporate Voicemail will receive this unanswered call.
Email...
The SMTP server must be configured to support the email options.
Please see the System Administrator’s Guide for details on setting up
the SMTP server.
Note: Only valid for Meridian and Avaya users.
VMWI Email
Voice Message Waiting Indicator (VMWI). Enabling this feature will
trigger an email to be sent to you every time a voice mail has been left in
your corporate mailbox.
Call Log Email
Enabling this feature will trigger an email to be sent to you with the Caller
ID information. This is useful when you have lost access to your voice
services. Please consult your PBX documentation to configure Caller ID.
Email Address
Enter the email address of the ConneX user. Note, that invalid
characters may be entered in this field such as the $ symbol. Ensure you
have entered the correct address. To edit an address simply use your
backspace, delete, right arrow, or left arrow keys to scroll and insert
characters. Press Enter to accept the address.
Security…
Idle Timeout
This is the amount of time a channel will be in the Idle mode (connected
but no active calls) before the mobile phone is disconnected. Set this