PBXgateway II Quick Installation Guide
17
Connections to the PBXgateway II
The PBXgateway requires connections A through E as shown below.
Table 1:
PBXgateway II Connectrions
Letter Label Cable
Type Description
A
Console
DB-9
Direct serial connection to a PC.
Note: Set the COM port as follows; Baud rate:
9600, Databits: 8, Parity: none, Stopbits: 1,
Software flow control: XON/XOFF
B
Modem
DB-9
Direct serial connection to a modem for remote
access.
(DTE).
Note: Set the COM port as follows; Baud rate:
9600, Databits: 8, Parity: none, Stopbits: 1,
Software flow control: XON/XOFF
C
100-240V
Power
Connect to a 120VAC outlet.
D Network
Interface
- Future
use.
E
AUX LAN
RJ 45 Ethernet
(10/100baseT)
Used for administrative purposes. (Telnet, FTP
and HTML)
F WAN1
WAN2
DB 25, serial,
straight-through
Used for a synchronous or asynchronous-serial
connection. Connect to a FRAD, CSU/DSU or
other network device.
Note: An RS-530 type cable or DB-25 to M34
cable should be used for high-speed links to V.35
equipment.
G Telephony
Interface
RJ 21
Wire to a punch down block and then to the PBX.