McHale
Fusion Vario
Baler & Wrapper
60
3.
In order to release the pressure from the belts the tailgate must now be closed
fully. This ensures that the tension arm rests on the stop inside the bale
chamber, allowing the belts to hang loose.
4.
Close the chamber door lock immediately.
Release the hydraulic pressure from the tension arm by pressing ‘density release’
(button L5) on the control box until the pressure on the clock falls to zero.
The hydraulic and spring pressure is now released allowing the operator to access the
grease points through slots in the chamber walls, two on either side.
To release the tension arm lock, once tension arm rollers have been greased, the lock
lever ‘
B
’ should be returned to the working position, before opening the tailgate fully to
release the stop and then closing the chamber again. The belts are now re-tensioned
and the machine can resume as normal.
The above instructions only cover the main components that must be greased daily
(250 bales).
McHale
recommend using a multipurpose, extra high performance grease such as
Mobilgrease XHP 222 or equivalent NLGI number 2 grade grease. This will prolong the
life of the machine components.
6.9 Gearbox oil
The gearbox is located to the rear of the PTO shaft.
B
B
