McHale
Fusion Vario
Baler & Wrapper
48
1.
Ensure the PTO is disengaged, the
tractor is shut down and ignition key
has been removed.
Slide the new roll of net onto the net
storage space on the platform.
NOTE:
Ensure that the roll is
orientated in the correct direction.
2.
Lift the net roll bar upwards until it
locks in the raised position.
Remove any packaging material and
the empty cardboard core of the
finished net roll and dispose of
responsibly.
Move the new net roll from the storage
position onto the netter cradle.
Remove the handle from the holster.
3.
Ensure the roller tension latch is
positioned, as shown on the left.
Insert the tabbed handle end into the
slot. Push back so the latch drops
down and then release.
This will spread the feed rollers on
the net feeding unit, as shown on the
right.
