McHale
Fusion Vario
Baler & Wrapper
100
Out of film
8.2 Plastic film requirements
Good quality silage depends on the use of top quality plastic film, in addition to well
shaped dense bales. Low standard film material will not produce good silage
regardless of how well the machine wraps the bale. The plastic film should be used and
stored according to the instructions of the film manufacturer.
It is recommended that a minimum of six (6) layers of film be applied to the bale. If the
material being wrapped is of a hard or stemmy nature it may be necessary to apply
eight (8) or ten (10) layers to ensure a good airtight package.
12.
Close the door firmly making sure
that both primary and secondary
latches have been engaged.
WARNING: Do not clamp film in the ‘cut & hold’ mechanism
Do not attempt to clamp plastic film in the ‘cut & hold’ mechanism as this
action may result in serious injury!
NOTE: Resume a cycle interrupted by ‘Out of film’ error symbol
Pushing the ‘Resume’ on the control box will complete the wrapping
cycle of a bale, that is interrupted by an ‘Out of film’ error symbol.
NOTE: Operator must check to ensure bales are wrapped correctly
The operator needs to ensure that the bale is wrapped correctly. It is
good practice to check the bales regularly after being wrapped for torn,
split or perforated plastic film.
