McDATA ULTRANET EDGE 3000, User Manual

Page: 276 / 428

11
11-14
McDATA UltraNet Edge 3000 User Guide
UltraNet ConfigManager Upgrade
Thu Sep 13 16:55:36 NOTICE: CNT511:nu_cfgd:1:5:0
ui_envput: Environment variable put
(_RPMCPUCheckDisabled) (YES) command received.
User Entry:
cfg envput _RPMCPUCheckDisabled YES
Ok.
rpm erase cmntwebview
rpm install WV32.RPM
rpm query -a
CMNTnucleus-V3.1.1.2-0
CMNTdiag-V3.1.1.2-0
CMNTsm-V3.1.1.2-0
CMNTwebview-V3.2-0
cfg envput _RPMCPUCheckDisabled NO
Thu Sep 13 16:56:49 NOTICE: CNT511:nu_cfgd:1:5:0
ui_envput: Environment variable put
(_RPMCPUCheckDisabled) (NO) command received.
User Entry:
cfg envput _RPMCPUCheckDisabled NO
Ok.
The above data shows a successful installation without any
errors.
After installing or upgrading WebView, the webserver needs to be
restarted so it can flush all the old WebView information and load
the new information from the current WebView program.
4. Issue the ews reinit command at the UltraNet Edge 3000 prompt.
example:
tm.0x10> ews reinit
UltraNet ConfigManager Upgrade
UltraNet ConfigManager is a graphical configuration tool that
provides a point-and-click process for designing and configuring
UltraNet Edge 3000 nodes. This tool allows the user to self-configure
and manage network configuration modifications.
This section contains the procedure for upgrading the UltraNet
ConfigManager to the most current version of software.
Verify the Current
Version of UltraNet
ConfigManager To verify the version of software installed on your PC, click on the
UltraNet ConfigManager Help
menu, then
About
. The version is
displayed in the About UltraNet ConfigManager screen.