McDATA ULTRANET EDGE 3000, User Manual

Page: 131 / 428

6
Configuring an F_Port Extension over an Ethernet WAN
6-25
Configuring a 2x2 Ethernet Wide Area Network
11. Click the Finish button.
The Network Map should now look similar to this:
• If you are creating a 1x1 configuration, the only selectable routing
type is
Dedicated Circuit .
• If you are creating a 2x2 configuration with FC Switch interfaces,
you only need to create one data path between the Fibre Channel
Switch interfaces, as there is only one instance of the Fibre