McDATA ULTRANET EDGE 3000, User Manual

Page: 25 / 428

Preface xxv
Preface
• EN61000-3-2:1995 - ITE-generic harmonic current emissions
standard for domestic, commercial, and light industrial
environments (equipment with rated current less than or
equal to 16 amperes per phase).
• EN61000-3-3:1995 - ITE-generic voltage fluctuation and flicker
standard (low-voltage power supply systems) for domestic,
commercial, and light industrial environments (equipment with
rated current less than or equal to 16 amperes per phase).
In addition, the European Union (EU) Council has implemented a
series of directives that define product safety standards for member
countries. The following directives apply:
• Products conform with all protection requirements of EU
directive
89/336/EEC (Electromagnetic Compatibility Directive) in
accordance with the laws of the member countries relating to
EMC emissions and immunity.
• Products conform with all protection requirements of EU
directive
73/23/EEC
(Low-Voltage Directive) in accordance with
the laws of the member countries relating to electrical safety.
• Products conform with all protection requirements of EU
directive
93/68/EEC (Machinery Directive) in accordance with
the laws of the member countries relating to safe electrical and
mechanical operation of the equipment.
McDATA does not accept responsibility for any failure to satisfy the
protection requirements of any of these directives resulting from a
non-recommended or non-authorized modification to a product.
European Union EMC and Safety Declaration
(N-Mark)
The N-mark on a product indicates compliance with European Union
EMC and safety requirements as tested, evaluated, and certified by the
Norwegian Board for Testing and Approval of Electrical Equipment
(Norges Elektriske Materiellkontroll or NEMKO) laboratory or a
NEMKO-authorized laboratory