McDATA ULTRANET EDGE 3000, User Manual

Page: 274 / 428

11
11-12
McDATA UltraNet Edge 3000 User Guide
UltraNet WebView Monitoring Application
Obtaining the
UltraNet WebView
Product The UltraNet WebView product is purchased separately from the
other UltraNet products. It can be obtained in a number of different
ways:
• If WebView is ordered with the UltraNet Edge 3000, it will be
installed on the UltraNet Edge 3000 and the customer will receive
a CD-ROM.
• If WebView is purchased after the UltraNet Edge 3000 is
purchased, the customer will receive a CD-ROM.
Using the WebView
Application Once the UltraNet WebView application has been purchased and
installed, you can access a node in your network by opening your
internet browser and entering the IP address of the UltraNet Edge
3000 in the address bar. For further help using the WebView
application, see the WebView Online Help.
Browser and System
Requirements for
WebView UltraNet WebView has been tested on the following operating
systems and browsers.
View the ReadMe file for Java plug-in information once you’ve
accessed the WebView application.
— Windows 98, 2000, and NT
— Internet Explorer 5.0, 5.5, and 6.0
WebView Security The WebView product is password protected and shipped with a
default user name and password. The default user name is
admin and
the default password is password . For security purposes, it is
suggested that these be changed.
To add, change, or delete user names and passwords, you will need
to Telnet into the UltraNet Edge 3000 box and make the changes at
the Command Line Interface (CLI). See the
UltraNet Edge Storage
Router Command Reference manual for the commands to perform any
of these functions. These commands can be found in the Nucleus
Commands section under the
ews submenu.
UltraNet WebView
Upgrade
This section contains the procedure for upgrading the UltraNet
WebView application to the most current version of software.