McCulloch LT25NCOP, Operator'S Manual, Page: 13 / 336

TECHNICAL DATA SHEET
M
ODEL:
75,00$&/71&23
ENGINE
Cylinder displacement, cm
3
25
At maximum engine power, rpm 8000
Maximum rotational frequency of the spindle, rpm 10000
Engine speed at recommended maximum spindle
rotational frequency, rpm
10000
Recommended speed idling, rpm 4000
Maximum engine power, measured in
accordance with ISO 8893, kW
0,
Catalytic converter muffler Yes
IGNITION SYSTEM
Spark plug Champion
Electrode gap, mm 0,6
FUEL AND LUBRICATION SYSTEM
Fuel tank volume capacity, cm
3
340
Fuel consumption at maximum engine power,
measured in accordance with ISO 8893, g/h
407
Specified fuel consumption at max. engine power,
measured in accordance with ISO 8893, g/kWh
768
WEIGHT
Weight without fuel, cutting attachment and guard, kg
NOISE EMISSIONS
(see Note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
WA
dB(A)
SOUND LEVELS
(see Note 2)
Equivalent sound pressure level at the operator s ear, measured
according to EN ISO 11806 and ISO 22868, dB(A)
Equipped with trimmer head (original)
VIBRATION LEVELS
(see Note 3)
Equivalent vibration levels (a
hv,eq
) at handles, measured
according to EN ISO 11806 and ISO 22867, m/s
2
Equipped with trimmer head (original), left/right 8,9/7,5
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with
EC directive 2000/14/EC. Reported sound power level for the machine has been measured with
the original cutting attachment that gives the highest level. The difference between guaranteed
and measured sound power is that the guaranteed sound power also includes dispersion in the
measurement result and the variations between different machines of the same model according
to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical statisti-
cal dispersion (standard deviation) of 1 dB(A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard
deviation) of 1 m/s
2
.
Model
75,00$&
5/16 RH arbor shaft thread)
Approved accessories Type Cutting attachment / guard, part. no.
Trimmer head TNG7 (
¡
2 mm line)
13
4&-<
537419223 / 530096229
3,9