ChipMaster Conveyor
Operation & Maintenance Manual
18
Rev. 05-2021
Note:
It is important to ensure that the chain drive sprockets are axially aligned to prevent
premature chain wear and overloading of the drive motor.
Adjust the tension in the drive chain using the threaded rods under the motor mount.
Slacken the locknuts and adjust the tension until there is approximately 1/8” of movement
in the chain at the mid-point between the sprockets. When the tension is correct, tighten
the locknuts on the adjuster.
Check the oil level in the gear reducer.
If your conveyor is supplied with its own control box, this now needs to be wired into a
suitable electrical supply. If your conveyor is supplied without a control box, then it will need
to be wired into the control system of your machine.
Note:
All electrical wiring must be completed by a qualified electrician according to local electrical
codes.
Summary of Contents for ChipMaster
