MC3 ChipMaster Operation & Maintenance Manual Download

Page: 20 / 63

ChipMaster Conveyor

Operation & Maintenance Manual

Rev. 05-2021

OPERATING SAFETY

Read and understand all of this Operator’s

Manual and all safety signs before using.

Disconnect power supply and lock out before

removing any guards, attempting any

maintenance, trouble shooting, or making

adjustments.

Clear area of personnel and foreign objects

before starting the conveyor.

Keep hands, feet, hair, and clothing away from

all moving and/or rotating parts.

Do not

operate conveyor when any guards are

removed.

NEVER

attempt to free the belt while the

conveyor is still running, as it could suddenly
re-start and cause injury to personnel or
damage to the conveyor.

Secure mounting hardware before operating.

Use conveyor only for intended purpose.

Review safety related items annually with all

personnel who will be operating or maintaining

this conveyor.

TO THE NEW OPERATOR OR OWNER

The ChipMaster Conveyor is designed to

filter waste material from machining and

sort scrap that accumulates from metal

forming. Be familiar with the conveyor

before starting.

In addition to the design and configuration

of the conveyor, hazard control and

accident prevention are dependent upon

the awareness, concern, and prudence of

personnel involved in the operation and

maintenance of the conveyor or in the use

and maintenance of facilities. It is the

responsibility of the owner or operator to

read this manual and to train all other

operators before they start working with

this conveyor. Follow all safety instructions

exactly. Safety is everyone’s responsibility.

following

the

recommended

procedures, a safe working environment is

provided for the operator, bystanders, and

the area around the worksite. Untrained

operators are not qualified to operate this

conveyor.

Many features incorporated into this

conveyor are the result of suggestions made

by customers like you. Read this manual

carefully to learn how to operate the

conveyor safely and how to set it to provide

maximum efficiency. By following the

operating instructions in conjunction with a

good maintenance program, your conveyor

will provide many years of trouble-free

service.

Summary of Contents for ChipMaster
































































Search results

Summary of Contents for ChipMaster

Reviews:

Related manuals for ChipMaster

Brands by name

Popular brands

MC3 ChipMaster, Operation & Maintenance Manual

Search results

Summary of Contents for ChipMaster

Reviews:

Related manuals for ChipMaster

Brands by name

Popular brands