Mazda CX-9 2021 Manual Download Page 593

Page: 593 / 720

NOTE

When inserting the luggage mat,
support the luggage board with one
hand so that it does not come off
the holders.

5. Remove the cover on the right side.

Cover

6. Remove the cargo sub compartment.

Cargo sub compartment

7. Turn the wing bolt and jack screw

counterclockwise.

Wing bolt

Jack screw

To secure the jack

1. Insert the wing bolt into the jack with

the jack screw pointing back and turn
the wing bolt clockwise to temporarily
tighten it.

2. Tighten the jack screw clockwise.

Wing bolt

Jack screw

3. Turn the wing bolt completely to

secure the jack.

NOTE

If the jack is not completely secured, it
could rattle while driving. Make sure
the jack screw is sufficiently tightened.

Maintenance



Always keep the jack clean.

If Trouble Arises

Flat Tire

7-5

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45

Summary of Contents for CX-9 2021

















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-9 2021

Reviews:

Related manuals for CX-9 2021

Brands by name

Popular brands

Mazda CX-9 2021, Manual

Search results

Summary of Contents for CX-9 2021

Reviews:

Related manuals for CX-9 2021

Brands by name

Popular brands