Mazda CX-9 2021 Manual Download Page 598

Page: 598 / 720

1. Loosen the lug nuts by turning them

counterclockwise one turn each, but do
not remove any lug nuts until the tire
has been raised off the ground.

2. Place the jack on the ground.
3. Turn the jack screw in the direction

shown in the figure and adjust the jack
head so that it is close to the jack-up
position.

Jack head

4. Set the jack to the designated jack-up

position closest to the tire being
removed.

(Jacking-up the vehicle front)

Set the groove on the top of the jack
head at a right angle into the center of

the designated jack-up position guide
projection closest to the vehicle front.

Jacking
position

Jacking head

Guide
projection

NOTE

Always set the jack into the designated
jack-up position shown in the figure
correctly.

(Jacking-up the vehicle rear)

Set the groove on the top of the jack
head at a right angle between the

If Trouble Arises

Flat Tire

7-10

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45

Summary of Contents for CX-9 2021

















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-9 2021

Reviews:

Related manuals for CX-9 2021

Brands by name

Popular brands

Mazda CX-9 2021, Manual

Search results

Summary of Contents for CX-9 2021

Reviews:

Related manuals for CX-9 2021

Brands by name

Popular brands