Mazda CX-9 2021 Manual Download Page 511

Page: 511 / 720

Front

Center

Rear

Front Map Lights

Type A

When the overhead light switch is in the
door or off position, press the lens to

illuminate the front map lights, and then
press the lens again to turn them off.

NOTE

The front map lights will not turn off even
if the lens is pressed in the following
cases:



The overhead light switch is in the ON
position.



The overhead light switch is in the door
position with the door open.



The illuminated entry system is on.

Type B

Press the switch to illuminate the front
map lights, and then press the switch again
to turn them off.

NOTE

The front map lights will not turn off even
if the switch is pressed in the following
cases:



The overhead lights turn on by
operating the overhead ON/OFF switch
(

Interior Features

Interior Equipment

5-55

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45

Summary of Contents for CX-9 2021

















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-9 2021

Reviews:

Related manuals for CX-9 2021

Brands by name

Popular brands

Mazda CX-9 2021, Manual

Search results

Summary of Contents for CX-9 2021

Reviews:

Related manuals for CX-9 2021

Brands by name

Popular brands