manualshive.com logo in svg

Mazda CX-9 2021, Manual

The Mazda CX-9 2021 boasts a sleek design and powerful performance, making it an ideal choice for families and adventure seekers alike. Discover the full potential of this impressive SUV with the free manual download from manualshive.com, ensuring you have all the information needed to fully enjoy your Mazda experience.

Share
Download
background image

Turbocharger Information

CAUTION

After driving at freeway speeds or up a long hill, trailer towing for a long time, idle the
engine at least 30 seconds before stopping it. Otherwise, the turbocharger could be
damaged.

Racing or over-revving the engine, particularly after it's just been started, can damage the
turbocharger.

To protect the engine from damage, the engine is designed so that it cannot be raced just
after starting it in extremely cold weather.

The turbocharger greatly enhances engine power. Its advanced design provides improved
operation and requires minimum maintenance.
 
To get the most from it, observe the following.
1. Change engine oil and filter according to Scheduled Maintenance (page 6-4).
2. Use only recommended engine oil (page 6-20). Extra additives are NOT recommended.

Before Driving

Driving Tips

3-56

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45

Summary of Contents for CX-9 2021

















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-9 2021

UnderCover 2110 Installation Manual preview
2110
Brand: UnderCover Pages: 16
Acdeos AXS FL Manual preview
AXS FL
Brand: Acdeos Pages: 38
Laser 4832 Manual preview
4832
Brand: Laser Pages: 8
Jabra SP200 - QUICKSTART GUIDE 1 Quick Start Manual preview
SP200 - QUICKSTART GUIDE 1
Brand: Jabra Pages: 2
Jabra BT150 - Headset - Over-the-ear Quick Start Manual preview
BT150 - Headset - Over-the-ear
Brand: Jabra Pages: 2
Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Brand: Jeep Pages: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Brand: Jeep Pages: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Brand: Jeep Pages: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Brand: Jeep Pages: 525
Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
Edelbrock Chevrolet 5783 Installation Instructions preview
Chevrolet 5783
Brand: Edelbrock Pages: 1
FORM FIT 1308 Installation Instructions preview
1308
Brand: FORM FIT Pages: 2
Quadratec 12057.0261 Installation Manual preview
12057.0261
Brand: Quadratec Pages: 12
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
ACV 281178-28G-M Installation Manual preview
281178-28G-M
Brand: ACV Pages: 2
Jaeger 21260514J Fitting Instructions Manual preview
21260514J
Brand: Jaeger Pages: 11
ATS 664-0030 Installation And Operating Manual preview
664-0030
Brand: ATS Pages: 12

Brands by name

Popular brands

Load more brands